Overview
Complete your Ohio Flame fire pit with an accessory built with the same emphasis on substantial American steel, straightforward construction, and artisan craftsmanship.
The Ohio Flame Flat Fire Pit Lid is designed for select sizes of The Patriot, The Liberty, and Ohio Flame Fire Rings, providing a clean, finished appearance when a compatible fire pit is not in use.
This is no lightweight sheet-metal cover.
Constructed from 3/16" thick American steel, the Flat Fire Pit Lid ranges from approximately 40 pounds to an impressive 109 pounds, depending on size. Two oversized handles made from 1/4" industrial steel provide substantial grip points for placement and removal.
Rather than simply resting loosely across the top of the fire pit, the lid is designed to index within the interior opening of the fire pit rim, helping create a snug, secure fit when the correct size is selected.
Finished in Ohio Flame's Natural Steel Finish, the lid develops an iron oxide patina and gradually darkens over time, allowing its appearance to evolve alongside your compatible Ohio Flame fire pit.
Proudly 100% Made in America, it's a purpose-built finishing accessory designed to look and feel like part of the fire pit—not an afterthought.
Key Features
- 3/16" Thick American Steel — Substantial steel construction creates a lid appropriately matched to Ohio Flame's heavy-duty fire pits.
- Four Sizes Available — Offered in 24", 30", 36", and 42" diameters.
- Up to 109 lbs. — Depending on size, the Flat Fire Pit Lid weighs approximately 40 to 109 pounds.
- Designed for Compatible Ohio Flame Products — Intended for select sizes of The Patriot, The Liberty, and Ohio Flame Fire Rings.
- Precision-Fit Indexing Design — Designed to index within the interior opening of the compatible fire pit rim for a snug, secure fit.
- Two Industrial Steel Handles — Oversized handles provide substantial grip points for lifting and positioning the lid.
- 1/4" Thick Handle Material — The handles themselves are constructed from heavy-duty industrial steel.
- Natural Steel Finish — Develops a natural iron oxide patina and gradually darkens with outdoor exposure.
- Designed to Complement Your Fire Pit — The evolving steel finish creates a cohesive appearance with compatible Natural Steel Ohio Flame fire pits.
- Clean, Finished Appearance — Gives the fire pit a simple, streamlined profile when properly positioned.
- 100% Made in America — Crafted in the USA by a local artisan.
- Free Shipping — This product qualifies for FREE SHIPPING.
Why This Product Stands Out
A substantial American steel fire pit deserves something more appropriate than a lightweight generic lid.
Ohio Flame builds this accessory accordingly.
The Flat Fire Pit Lid uses 3/16" thick American steel—the kind of material specification that immediately separates it from thin decorative covers.
The difference becomes particularly apparent as the size increases.
The 24" lid already weighs approximately 40 pounds.
The 36" version weighs approximately 55 pounds.
And the largest 42" lid weighs an extraordinary 109 pounds.
The fit is equally important.
Rather than merely balancing across the top edge of the fire pit, the lid is designed to index within the interior opening of the rim, creating a more integrated relationship between the lid and compatible Ohio Flame fire pit.
The result is a lid that shares the same material-forward philosophy as the fire pits themselves:
Heavy American steel. Simple construction. Functional design. No unnecessary decoration.
Choose Your Lid Size
| Lid Diameter | Steel Thickness | Approx. Weight |
|---|---|---|
| 24" | 3/16" | 40 lbs. |
| 30" | 3/16" | 45 lbs. |
| 36" | 3/16" | 55 lbs. |
| 42" | 3/16" | 109 lbs. |
Specifications
Product: Flat Fire Pit Lid
Brand: Ohio Flame
Product Type: Steel fire pit lid/accessory
Material: American steel
Available Diameters: 24", 30", 36", 42"
Lid Thickness: 3/16"
Approximate Weight Range: 40–109 lbs.
Handle Material: Industrial steel
Handle Thickness: 1/4"
Number of Handles: 2
Finish: Natural Steel Finish
Finish Characteristic: Develops a natural iron oxide patina and gradually darkens
Fitment: Designed to index within the interior opening of the compatible fire pit rim
Compatible Product Families: Select The Patriot, The Liberty, and Ohio Flame Fire Rings
Manufacturing: 100% Made in America
Construction: Artisan crafted
Shipping: Free Shipping
What's Included
Each order includes:
- One Ohio Flame Flat Fire Pit Lid in your selected size
- Two integrated industrial steel handles
Important: Measure Before Ordering
Compatibility should be confirmed before purchase.
The listed lid diameter alone should not be assumed to guarantee compatibility with every Ohio Flame fire pit of a similarly named size.
Because the lid is designed to index within the interior opening of the fire pit rim, correct fitment depends on the dimensions of the compatible opening.
Before ordering:
- Identify your Ohio Flame fire pit model.
- Confirm the size of your fire pit.
- Measure the relevant interior opening.
- Compare your measurements with Ohio Flame's fitment requirements for the selected lid.
- Select the appropriate lid only after confirming compatibility.
This is especially important if your fire pit is older, its exact model is uncertain, or you're purchasing the lid separately from the fire pit.
Accessory Compatibility
The Flat Fire Pit Lid cannot be used simultaneously with certain other Ohio Flame accessories.
Before installing the lid, remove accessories including:
- Spark Screen
- Table Top
- MARs products
These accessories should not remain installed underneath or alongside the Flat Fire Pit Lid unless Ohio Flame specifically instructs otherwise.
A Substantial Steel Accessory
The weight of these lids deserves attention before purchase.
| Size | Approx. Weight |
|---|---|
| 24" | 40 lbs. |
| 30" | 45 lbs. |
| 36" | 55 lbs. |
| 42" | 109 lbs. |
This substantial weight is part of the product's heavy-duty character—but it also affects everyday handling.
The 42" lid in particular requires careful consideration, as its approximately 109-pound weight may require more than one person or appropriate assistance to safely position and remove.
Customers should choose a size they can safely handle during normal ownership.
Dual Industrial Steel Handles
Two oversized handles provide dedicated grip points for placement and removal.
The handles are themselves constructed from 1/4" thick industrial steel, reinforcing the lid's substantial character.
Because the lid and handles can become hot when exposed to heat, never attempt to install or remove the lid until the fire pit and surrounding steel have cooled completely.
Natural Steel Finish
Like many Ohio Flame products, the Flat Fire Pit Lid embraces the natural character of steel.
Its Natural Steel Finish develops an iron oxide patina and gradually darkens over time.
That evolution helps the lid visually complement a compatible Ohio Flame fire pit as both pieces age outdoors.
Variations in patina and coloration should be expected as part of the natural character of the material.
Designed as Part of the Ohio Flame System
Generic fire pit covers are designed to fit as many products as possible.
The Ohio Flame Flat Fire Pit Lid takes the opposite approach.
It's designed specifically around compatible Ohio Flame products, including select sizes of:
- The Liberty
- The Patriot
- Ohio Flame Fire Rings
For customers who have invested in an American-made Ohio Flame fire feature, that purpose-built approach helps maintain a consistent look and material quality throughout the installation.
Who This Is For
The Ohio Flame Flat Fire Pit Lid is designed for owners of compatible Ohio Flame fire pits who want a substantial steel finishing accessory built to complement their existing fire feature.
It's particularly well suited for:
- The Liberty owners
- The Patriot owners
- Ohio Flame Fire Ring owners
- Buyers seeking purpose-built Ohio Flame accessories
- Customers who prefer American-made products
- Owners who appreciate substantial steel construction
- Outdoor spaces where a clean appearance matters when the fire pit isn't operating
- Customers who want an accessory that develops patina alongside their fire pit
Care & Handling
The Natural Steel Finish is intended to develop patina, so changes in surface appearance are expected.
Periodically remove loose debris as needed.
Because of the substantial weight of the lid, always use the integrated handles and maintain a secure grip when moving it.
Never place the lid over an active fire or while the fire pit, ashes, embers, or surrounding steel remain hot.
Allow everything to cool completely before installing the lid.
Follow all Ohio Flame care and usage instructions.
Important Safety Information
The Flat Fire Pit Lid is a heavy steel accessory.
For safe use:
- Confirm compatibility before installation.
- Never position the lid over an active fire.
- Ensure all flames and embers are fully extinguished.
- Allow the fire pit, ashes, and steel to cool completely before installing or removing the lid.
- Use the integrated handles when handling the lid.
- Keep hands and fingers clear of pinch points while lowering the lid into position.
- Do not attempt to lift a lid beyond your physical ability.
- Use appropriate assistance for heavier sizes.
- Take particular care with the 42" lid, which weighs approximately 109 pounds.
- Remove incompatible accessories before positioning the lid.
- Follow all manufacturer instructions.
Common Questions
What is the Flat Fire Pit Lid made from?
It is constructed from 3/16" thick American steel.
What sizes are available?
Choose from 24", 30", 36", and 42" diameters.
How much do the lids weigh?
Approximate weights are:
- 24" — 40 lbs.
- 30" — 45 lbs.
- 36" — 55 lbs.
- 42" — 109 lbs.
What are the handles made from?
The two handles are constructed from 1/4" thick industrial steel.
Which Ohio Flame products are compatible?
The lid is designed for select sizes of The Patriot, The Liberty, and Ohio Flame Fire Rings. Exact fitment should be confirmed before ordering.
Should I measure my fire pit before ordering?
Yes. Because the lid indexes within the interior opening, verify the required dimensions and compatibility before purchase.
Does the lid simply rest on top?
It is designed to index within the interior opening of the compatible fire pit rim, helping create a snug fit.
Can I use it with a Spark Screen?
Not at the same time. The Spark Screen should be removed before installing the Flat Fire Pit Lid.
Can it be used with an Ohio Flame Table Top or MARs accessory?
Not simultaneously. These accessories must be removed before positioning the Flat Fire Pit Lid.
Will the lid change color outdoors?
Yes. The Natural Steel Finish develops an iron oxide patina and gradually darkens over time.
Is it made in the USA?
Yes. The Flat Fire Pit Lid is 100% Made in America.
Can I put the lid on immediately after extinguishing the fire?
No. Allow the fire pit, embers, ashes, and steel to cool completely before installing the lid.
Does this product qualify for free shipping?
Yes. This product qualifies for FREE SHIPPING.